LED signalization for barriers
RGB Led Strip
- The signaling rubber with LED strip is inserted into the slot of the barrier arm
- In closed or moving condition of the barrier arm, the LED strip will light up red, in open condition, the strip will light up green.
- Power supply: 24VDC
- Power consumption: 14.4 W/m
- MTBF: + 50,000 hours
- IP protection: IP 65
- Operating temperature: -25°C to +50°C
- Possible in combination with RS485 control
- Available per running meter
LED signaling lights
- The LEDs are mounted so they are visible from both sides of the barrier
- Depending on the setting of the barrier control unit, the signaling light can light up at different times in the cycle
- The signaling LEDs are always placed at the center of the reflective strips
- The number of LEDs varies depends of the length of the boom:
2.5 m : 2 light points
3.5 m : 2 light points
4.5 m : 3 light points
5.5 m : 4 light points - Power supply: 24 VDC
- Consumption: 30 mA
